You have to note that the this utility will work quite fast, but you might need to have a decent computer to enable that. It comes with a simple interface that lets you do the scans quickly and make sure that the IP addresses connected to your network work as they should.
It’s a simple and lightweight tool that will serve most users well, even the beginners. In that case, you can optimize the network and remove any IP.Īnd with the Angry IP Scanner, you’ll be able to know exactly what IP addresses there are connected to your network. Sometimes, you might notice that there are some unwanted IPs connected, and there are also some IP addresses that serve no purpose because they are inactive. Congratulations! You now entered the cameras Web User Interface.Angry IP Scanner is a lightweight IP scanner that can scan the IPs and send pings to the selected IPs to make sure they are still alive.Ĭhecking your network for connected IP addresses can be important to promote network stability and safety.
#Angre ip scanner password#
You will now be greeted by the camera´s login page - the default credentials are username admin and the password can be left blank (or type in instar in case of a HD camera model). Once you discovered your camera´s IP address, simply copy the address by right-clicking on it and paste it into your web browsers address bar and press the Return button.Ĭopy the IP address and paste it into your browsers address bar to load the cameras web user interface.
The now missing entry will reveal the cameras IP address. If you are unsure which host is the camera, unplug the camera and re-scan the network. If you are using more than one camera in your network we recommend, you only connect one camera at a time in order to differentiate them. If the Angry IP scanner does not resolve the hostname, it under Tools - Fetchers. The scanner will display a new network device with the hostname ipcamera (only VGA cameras). Now connect your camera to your router and re-run the scan. The scan reveals that there are 5 active devices inside the given IP range. In the case below we have 5 active devices. The scanner will now display all active devices in your network (marked in blue as shown below). You can use the ipconfig command to confirm the IP range of your network. Make sure your camera is disconnected from your network and then press Start to begin the scan. Use this IP address in Angry IP Scanner and just change the last octet to 1 for the start IP address and 254 for the last IP address to search the complete /24 subnet. If you do not know the IP range, then simply use the command line on Windows, type in ipconfig and check your computers IPv4 address (see screenshot below). Please fill out the field IP Range with the IP range that your router´s DHCP service is set to.
#Angre ip scanner install#
You can find the newest Version HERE For Windows/macOSX/LINUX - install and start the application, type in the IP range and start the search. If you do not have access to your router or if your router does not have any log files, please refer to alternative IP scanners - an examples is: Angry IP Scanner (Windows/MacOSX/Linux) You should reach the cameras login portal by typing this address into the web browser´s address bar. Most routers will give you a log file of fresh DHCP requests, in which you should be able to find the camera´s IP address. The camera will try to receive an IP address automatically (DHCP) during the first installation. If, for some reason, the IP Camera Tool does not work on your computer, here are a few other options to discover the IP address.
#Angre ip scanner how to#
Instructions on how to set up your INSTAR IP camera with the Camera Tool can be found here. The IP Camera Tool (Windows), IP Camera Tool (macOS) or IP Camera Tool (LINUX) is for sure the most comfortable way to find your IP camera inside your network. Alternative IP Scanner Angry IP Scanner How to find your IP Camera in the network with an alternative IP Scanner?
0 kommentar(er)
